―１２―
Caution!
Caution!Caution!
Caution!
• Make sure to check and double check this step. This is the most important st
Make sure to check and double check this step. This is the most important stMake sure to check and double check this step. This is the most important st
Make sure to check and double check this step. This is the most important step in this
ep in this ep in this
ep in this
install.
install. install.
install.
• Without proper clearance and thermo wrapping the fuel lines, the fuel line connector can
Without proper clearance and thermo wrapping the fuel lines, the fuel line connector can Without proper clearance and thermo wrapping the fuel lines, the fuel line connector can
Without proper clearance and thermo wrapping the fuel lines, the fuel line connector can
melt from heat and may catch on fire.
melt from heat and may catch on fire. melt from heat and may catch on fire.
melt from heat and may catch on fire.
• Wrap the Starter and the Main Engine harness right
Wrap the Starter and the Main Engine harness right Wrap the Starter and the Main Engine harness right
Wrap the Starter and the Main Engine harness right
above the transmission bell housing.
above the transmission bell housing. above the transmission bell housing.
above the transmission bell housing.
Important!
Important!Important!
Important!
Make sure that the main engine harness is properly
wrapped and secured away from the manifold and the
wastegate when they are installed.
Caution!
Caution!Caution!
Caution!
Without proper clearance and thermo wrapping the
harness, it melt and cause a short in the electrical
system or may catch on fire.
3
33
3-
--
-2
22
2
Water Line Suction Connector
Water Line Suction Connector Water Line Suction Connector
Water Line Suction Connector Installation
InstallationInstallation
Installation
1. Remove the factory water tube and Install the water
line suction connector.
2. Cut the Acryl hose 15Φ to 310mm and Install it
between the Suction connector and the water tube.
(Parts used #44, 60, 73)
3
33
3-
--
-3
3 3
3 Modification the
Modification the Modification the
Modification the Engine Mount
Engine Mount Engine Mount
Engine Mount
1. Remove the Engine Mount, and Shave the
Engine Mount as shown in the marked area.
2. Re Install the Engine Mount.
Water Line Suction
Water Line Suction Water Line Suction
Water Line Suction
Connector
ConnectorConnector
Connector
6mm
6mm6mm
6mm
Grind Down
Grind DownGrind Down
Grind Down
15mm
15mm15mm
15mm
(22 pages)
Manymanuals.com
Manymanuals.de
Manymanuals.fr
Manymanuals.it
Manymanuals.pl
Manymanuals.cz
Manymanuals.es
Manymanuals-pt.com
Commentaires sur ces manuels