Greddy TURBO KITS: Nissan 370Z 2009- / twin TD06SH-20G Manuel d'utilisateur télécharger pdf (Page 11)

―１１―

3. Turbo

3. Turbo3. Turbo

3. Turbo Kit Installation

Kit Installation Kit Installation

Kit Installation

-1

1 1

1 Thermo Cloth Installation

Thermo Cloth Installation Thermo Cloth Installation

Thermo Cloth Installation

• Remove the bracket securing the fuel line right below the right side shock tower and disconnect

the fuel line. Wrap the fuel and evap line using safety wire. Cover the fuel and evap line using

frame guard

. Reconnect the fuel and evap line. Modify the fuel and evap line as

shown.

(Parts used #73, 74)

(This picture shows the turbo already installed)

Important!

Important!Important!

Important!

• Make sure that the fuel line is secured away from the turbine housing when the turbo is

installed. Some bending of the lines is necessary to achieve proper clearance.

• Make sure the lines are properly wrapped twice.

• Make sure to use safety wire to wrap the thermo cloth. Zip ties will melt from the heat and

eventually will come off.

• Make sure that the fuel line connector is properly clicked in all the way.

• GReddy Performance Products, Inc. will not be responsible for any damage caused due to

improper installation.

Bend the fuel line

Bend the fuel lineBend the fuel line

Bend the fuel line

#６

６６

６ 1Tube Clamp

1Tube Clamp1Tube Clamp

1Tube Clamp

1 2 ... 6 7 8 9 10 11 12 13 14 15 16 ... 20 21

Pas de commentaire

Greddy TURBO KITS: Nissan 370Z 2009- / twin TD06SH-20G Manuel d'utilisateur Page 11