Greddy INTERCOOLERS: Mitsubishi RalliArt 2009- / Type31V Manuel d'utilisateur télécharger pdf (Page 8)

4. STARTING THE ENGINE

(1) Check all the hose, piping and wire connections, then reconnect the negative side of

the battery.

(2) Start the engine. While idling, check for any air leeks.

(3) After inspection, reinstall the front bumper, under carriage cover and other stock parts

that were removed.

(4) On the initial run, be sure to have a boost gauge to check the turbo-actuator setting.

It is very important that you monitor the boost pressure, and make sure not to over-

boost. Over-boosting can cause engine damage.

This completes the Intercooler Kit installation.

1 2 3 4 5 6 7 8

Pas de commentaire

Greddy INTERCOOLERS: Mitsubishi RalliArt 2009- / Type31V Manuel d'utilisateur Page 8