GReddy Turbo Kit 2003 Nissan 350Z (VQ35DE) Twin TD05-18G 8cm2
Caution! • Make sure to check and double check this step. This is the most important step in this install. • Without proper clearance and thermo w
Oil Pressure Line Installation Install the oil pressure line to engine block using provided fittings. (Part Used #20, 21, 22, 23, 24) 600mm line is
Turbocharger Installation 1. Install the turbocharger on to the exhaust manifold installed in the previous step. * For the left side, remove the ste
Wastegate Installation Install the provided banjo fitting on to the bottom port of the wastegate. (Top Port is used for boost controller) Install the
Vacuum hose for Wastegate Installation Remove the factory engine cover. Locate the rubber plug on the intake manifold and remove it. Connect the 5∅
Compression Pipe Installation 1. Install the Air flow meter adapter on tot he air flow meter. 2. Install the Compression pipe C-1, C-2, C-3, C-4, C-
Brake Check Valve Installation Install the provided check valve as shown. (Part Used #39, 46) Injectors Installation 1. Remove the upper intake
E-manage Installation Install the e-manage and the rpm adapter as shown in the diagram. Make sure to solder all connections except for the ones that a
E-manage Installation 24 23 22 21 20 19 18 17 16 15 14 13 12 11 10 9 8 7 6 43 42 41 40 39 38 37 36 35 34 33 32 31 30 29 28 27 26 2562 61 60
E-manage Installation e-manage Factory ECU Pin # Wire Color Description ECU Pin # Color Code 3 White MAP IN 51 (harness Side) Orange Airflow
Installation Manual Please read the entire manual before installing this kit. Application: Make Model Chassis Year Nissan
Starting the Engine 1. Refill the engine oil to factory spec. 2. Check all the hoses and wires connection, then reconnect the negative side of the
e-manage Information Important! • The e-manage included in this kit is preprogrammed for the this turbo kit. • Do not attempt to adjust any of the
1. Parts List 1. Turbocharger TD05-18G 8cm2 2 2. Wastegate (GReddy / Tial) .45bar 2 3. Exhaust Manifold (Right Side) Ductile Iron Cast
38. “ 70∅ - 80∅ Reducer 1 39. Hose Band 12∅ #8 4 40. “ 16∅ #10 9 41. “ 50∅ #32 ____________ 12
1. Parts List 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
1. Parts List 21 22 23 24 25 26 27 28 29 30 - 33 34 - 38 39 - 40 45 46 47 48 49 50 51 52
1. Parts List 53 54 55 56 57 58 59 60 61 62 63 64 65 66 - 75
2. Factory Parts Removal When removing the stock parts, make sure you read over the factory repair manual for proper procedures. 2-1 Disconnect the
3. Turbo Kit Installation Thermo Cloth Installation • Remove the bracket securing the fuel line right below the right side shock tower and disconn
Commentaires sur ces manuels