Greddy TURBO KITS: Acura RSX Type-S 2002-03 / T517Z Manuel d'utilisateur télécharger pdf (Page 8)

2. Removal of Stock Parts

When removing the stock parts, make sure you read over

the factory repair manual for proper procedures.

2-1 Disconnect the negative terminal of the battery.

2-2 Release the fuel pressure in the fuel system by loosening the fuel pulsation

damper on top of the fuel rail. (see factory repair manual for detail procedure).

2-3 Drain the engine oil.

2-4 Remove the front strut bar and it’s brackets.

2-5 Remove the engine cover.

2-6 Remove the Air cleaner assembly with intake tube, breather hose and Intake

temperature sensor.

2-7 Disconnect the primary and secondary O2 sensor and remover the catalytic

converter.

2-8 Remove the VTEC solenoid valve assembly.

2-9 Remove the exhaust system heat shield and manifold.

2-10 Remove the heat shield plate (bottom of the firewall) and the intermediate drive

shaft heat shield.

1 2 3 4 5 6 7 8 9 10 11 12 13 ... 22 23

Pas de commentaire

Greddy TURBO KITS: Acura RSX Type-S 2002-03 / T517Z Manuel d'utilisateur Page 8