Greddy TURBO KITS: Infiniti G35 coupe 2003-04 / twin TD05 Manuel d'utilisateur télécharger pdf (Page 18)

Brake Check Valve Installation

Install the provided check valve as shown.

(Part Used #39, 46)

Injectors Installation

1. Remove the upper intake manifold collector, fuel rail assembly with injectors and

regulator.

2. Grind the top of the fuel rail as shown to clear the intake manifold.

Make sure not to grind too much. Grind the part on the bracket that is raised down flat.

Clean the rail thoroughly after grinding.

3. Install the 440cc injectors and reinstall the fuel rail using the provided spacer.

(Part Used #65)

4. Cut the factory injector connectors and solder in the provided connector harness.

How to solder

①Strip the end of wires

② Twist the end together

③ Solder the wires

④ Tape up the soldered area

(Make sure to solder

Completely)

1 2 ... 13 14 15 16 17 18 19 20 21 22 23

Pas de commentaire

Greddy TURBO KITS: Infiniti G35 coupe 2003-04 / twin TD05 Manuel d'utilisateur Page 18