Greddy AIR INTAKE SYSTEMS: Infiniti G37 2008-11 Manuel d'utilisateur Page 1

Instruction Manual P/N: 12529001Make: Infiniti Model: G37 Year: 2008-2011 Engine: V6-3.7L* Optional (12529002)

Pro DRY S Air FilterTo purchase any of the items above, view airflow charts, dyno graphs, photos, and video; please go to Greddy.com.Page 10ShieldP/N:

Page 11GReddy.comPage Left Intentionally blank

GReddy Performance Products9 Vanderbilt, Irvine CA 92618TEL: 949.588.8300 • [email protected]/N: 06-80494

Installation will require the following tools:Flat head & Phillips screwdriver, Vice grip, Pliers, 8mm socket, 10mm socket, Ratchet & 5/16 nut

Note: Legal in California for use on race vehicles only. The use of this device on vehicles used on public streets or highways is strictly prohibited

Refer to Figure A for steps 1-6Step 1: Remove the engine cover fasteners 1 and remove the engine cover.Step 2: Loosen the clamp securing the intak

Refer to Figure B for steps 7-12Step 7: Remove the retaining clips from the top of the front bumper. 6 Step 8: Remove the 10mm bolts on the inside

Refer to Figure C for steps 13-15Step 13: Remove the air scoop mounting bolt and remove the scoop through the engine side of the vehicle. Step 14: L

Refer to Figure C & D for steps 16-20Step 16: Install the angled couplings G through the opening of the core support with the long side tow

Page 8Refer to Figure E for steps 21-24Step 21: Install the h-shaped tube mounting brackets onto the bumper brace in front of the radiator. Step 22: I

Page 9LJRefer to Figure F & B for step 25Step 25: Install the bumper by repeating steps 7 through 12 in reverse. Your installation is now compl